The maiden flight of Gilmour Space’s Eris-1 rocket lifted off on July 30, 2025 (local time; July 29 UTC), from the Bowen Orbital Spaceport at Abbot Point in North Queensland.
Eris-1 is a three-stage small-lift launch vehicle designed to carry up to 300 kg of payload to low Earth orbit. The vehicle has four of Gilmour’s Sirius hybrid rocket motors propelling the first stage, another Sirius motor in its second stage, and a new Phoenix liquid rocket engine in its third stage. Eris has a height of 25 m and a diameter of 2m for the first stage, which tapers at the interstage of the first and second stage to 1.5 m. The payload fairing has 2 diameter versions, either 1.5 m or 1.2 m.
Unfortunately, the flight ended in failure shortly after liftoff. The rocket cleared the launch tower but experienced an anomaly, shifting off course while maintaining attitude, failing to build sufficient thrust, and ultimately falling back to Earth before exploding seconds later.
There was an apparent malfunction in at least one of the four Sirius hybrid rocket engines shortly after liftoff. Video footage and post-launch observations indicate that the engine issue caused asymmetric thrust, resulting in the vehicle drifting sideways, failing to gain sufficient altitude, and crashing back to Earth after approximately 14 seconds of flight. Analysis from videos suggests that one engine failed almost immediately, reducing the thrust-to-weight ratio (TWR) from an estimated 1.56 (with all engines operational) to around 1.17, followed by a second engine failure that dropped the TWR below 1 (to about 0.78), leading to the vehicle’s inability to maintain ascent.
The hybrid Sirius engines use hydrogen peroxide oxidizer and a 3D-printed solid fuel grain. It generates approximately 115 kilonewtons at sea level.
Oct 05